Working Mode: One end has a three-way switch which is ON-OFF-G set it to always on or motion-sensor, or off It uses simple sticky tapes to tape the light anywhere you want it to be. and then the light itself has a magnet built into it.
Super Bright & Rechargeable: Built-in rechargeable 850mAh polymer lithium battery.
Motion Sensor: Automatically senses human motion within 10ft/120° and shuts off after about 20 seconds of no movement.
Built-in Magnet to Stick on Any ironwork: Very easy to install and get set up no need for drilling or extra switch. pretty compact and stylish, so you can remove the light from the magnet for charging or as a hand-held light.
Various applications: It can be placed in a closet, drawer, cabinet, or any other dark place.
1. No wiring is required for charging, the magnetic suction method is convenient to pick and place, and it can also be used by hand.
2. Ultra-thin and ultra-light, the product thickness is only 12.5mm, the length is 19cm-33cm, and the weight is only 80-130 grams (3-5 ounces)
3. Human body induction + dark recognition, more energy-saving. The four-level light setting for daytime induction mode, one more choice
4. The sensing distance of the old model is 3 meters, the new type C plug is more convenient to use, and the sensing distance is increased to 5 meters
5. Product brightness 80-300lm, battery capacity 1000-2500mAh, continuous lighting for more than 10 hours, or induction lighting method for more than 300 times.
The brightness of 10 LED products is about 100lm (+/-20%), which is roughly equivalent to the brightness of 2 watts of incandescent light, or the brightness of about 80 ordinary candles.
The human body movement triggers the light to turn on, and the light turns off after an automatic delay of 20 seconds. If the human body is detected again during the lighting period, the lighting will automatically delay again for 20 seconds. Very easy to use.
[USB Rechargeable Cabinet Lights]
Built-in 1500mAh rechargeable lithium battery, can be recharged via the USB devices, a USB cable is included.
[3 Modes Adjustable]
These led lights have 3 modes: Instant On/Instant Off/Motion Sensor Light can be used as a normal night light or motion sensor light, can be installed in different cabinets, wine shelves, closets, and other spaces for decorative or local lighting.
[Under Motion Sensor Mode]
* Light won't light up during the daytime when it is bright enough.
* If you want it to light up in the daytime, just cover the motion sensor for a moment.
* Don't put 2 pack motion-activated LED closet lights too close. The light of one night light may cause the other not to light up if they are too close.
Two Ways to Install:
Built-in magnet on the back of light allows it to absorb on any ironwork surface.
Stick on any non-ironwork surface with the included 3M Adhesive Magnetic strip. No tools, screws, or nuts are required. When you need to charge or change place, you can take it off easily.
Suitable for closets attics garages cars sheds storage rooms bedroom baby room cabinet corridor workshop basement kitchen coat closet drawer or any other dark place.
1 x wireless motion sensor LED light
1 x Ironhide
2 x double-sided tape
1 x USB cable
1 x User Manual
2 years. We remove the risk to ensure your satisfaction. Lepotec's 2-year warranty got you covered! Contact us for an easy and fast replacement of your LED under cabinet lights.
Slide the switch to "ON" mode. It works as a normal LED light. You have to manually turn it off by sliding the switch to ''OFF".
Slide the switch to "G" mode. It turns on automatically if people passing by has been sensed, and extinguishes automatically 30s after there is no movement. Please note that the inductor will not be triggered and the light will be off in a bright light environment. Therefore, you don't need to manually turn it off during daytime.
With a built-in thermosensitive infrared sensor, the LED motion sensor lights will be auto-on within 10 feet and auto-off after 30 seconds of no motion detected. Motion sensing feature can be turned off if you want to use it as a normal night light.
Lepotec LED motion sensor lights are durable and stylish. They are ideal for the bedroom, kitchen, closets, cabinet, workshop, basement, garage, stairwell, RV and any other places you need extra light. It can also be your power failure emergency light.
Wireless installation takes less than 5 minutes with the included double-sided tape and magnetic strip. No tools, screws or nuts are required. Just stick it anywhere you want, and it allows you to take the light bar off to recharge easily.
The ultra-slim Lepotec LED light has a built-in 1000-2500(based on different product) mAh high-capacity rechargeable battery with USB charging port which can be charged with USB plug, power bank or computer USB interface. The Lepotec LED lights can last for about 8 hours after fully charged.
Stick-on Anywhere Portable Little Light Wireless LED Under Cabinet Lights 10-LED Motion Sensor Activated Night Light